Uses of Interface
com.ergotech.secs.SecsFormat

Packages that use SecsFormat

Package	Description
com.ergotech.secs
com.ergotech.secs.gem
com.ergotech.transsecs.secs
com.ergotech.transsecs.secs.characterization
com.ergotech.transsecs.secs.host
com.ergotech.vib.manipulators

Uses of SecsFormat in com.ergotech.secs

Subinterfaces of SecsFormat in com.ergotech.secs

Modifier and Type	Interface and Description
interface	SecsFormat3x Generic superclass of the int data types.
interface	SecsFormat3x5x Generic superclass of the int data types.
interface	SecsFormat4x Generic superclass of the float data types.
interface	SecsFormat5x Generic superclass of the unsigned int data types.

Classes in com.ergotech.secs that implement SecsFormat

Modifier and Type	Class and Description
class	ABS Any Binary String.
class	ACKA Indicates success of a request.
class	ACKC1 Acknowledge for tag write data.
class	ACKC10 Acknowledge code.
class	ACKC5 Acknowledge code.
class	ACKC6 Acknowledge code.
class	ACKC7 Acknowledge code.
class	AGENT AGENT.
class	ALCD Alarm Code Byte - Used in S5F1,F6 This is a one byte binary (Format 10) data structure that has the following values:
class	ALED Alarm enable/disable Code, 1 Byte - Used in S5F3 This is a one byte binary (Format 10) data structure that has the following values:
class	ALID Alarm Identification, Used in S5F1,F3,F5,F6.
class	ALTX Alarm text limited to 40 characters , Used in S5F1,F6.
class	AREYOUTHERE AREYOUTHERE.
class	ATTRDATA Contains a specific attribute value for a specific object.
class	ATTRID
class	CARRIERID CARRIERID.
class	CEED Collection event or trace enable/disable Code.
class	CEID Collection event ID.
class	CEPACK Command Enhanced Parameter Acknoowledge - Used in S2F50 If a specific value of CPNAME is defined to have a CEPVAL that is a LIST, then CEPACK shall have the same structure as the corresponding list format of CEPVAL as used in S2F63.
class	CEPVAL Command Enhanced Parameter Value.
class	CMDA Command acknowledge code.
class	COMMACK Establish Communications Acknowledge Code.
class	CPACK Command Parameter Acknoowledge Code, 1 Byte - Used in S2F42 This is a one byte binary (Format 10) data structure that has the following values:
class	CPNAME
class	CPVAL Command Parameter Value.
class	CSAACK Equipment Acknowledge Code (CSAACK) Data Decoder, used in S2F8.
class	CTLJOBCMD CTLJOBCMD.
class	CTLJOBID CTLJOBID.
class	DATAID
class	DATALENGTH
class	DRACK Define Report Acknowledge code.
class	DSID
class	DSPER Data Sample Period, 6 Bytes Max (HHMMSS).
class	DVNAME
class	DVVAL Data value.
class	EAC Equipment Acknowledge code.
class	ECDEF Equipment Constant Default Value.
class	ECID Equipment Constant ID.
class	ECMAX Equipment Constant Maximum Value.
class	ECMIN Equipment Constant Minimum Value.
class	ECNAME Equipment Constant Name .
class	ECV Equipment Constant Value.
class	EDID Expected data Identification.
class	ERACK Enable/Disable Event Report Acknowledge Code.
class	ERRCODE ERRCODE.
class	ERRTEXT ERRTEXT.
class	FCNID Function Identification.
class	GRANT Grant (GRANT) Data Decoder, used in S2F2, F40, S4F26, S13F12, S16F2.
class	GRANT6 Grant6 Permission to send, 1 byte.
class	HCACK Host Command Parameter Acknoowledge Code, 1 Byte - Used in S2F42, F50 This is a one byte binary (Format 10) data structure that has the following values:
class	HINTEG High Integrity mode.
class	LENGTH Process Program Length (LENGTH) Data Decoder, used in S2F1, S7F1 and S7F29.
class	LIMITACK Acknowledgment code for variable limit attribute set, 1 byte.
class	LIMITID LIMITID Data Decoder.
class	LIMITMAX LIMITMAX data decode.
class	LIMITMIN LIMITMIN data decode.
class	LINKID LINKID.
class	LOC Machine material location code, 1 byte.
class	LOWERDB LOWERDB data decode.
class	LRACK Link Report Acknowledge code.
class	LVACK Variable limit definition acknowledge Code, 1 byte.
class	MDLN Equipment Model Type, 6 Bytes.
class	MEXP Message expected in the form SxxFyy where x is stream and y is function - Used in S9F13 This is a one string (Format 20) data structure
class	MF Material Format code, 1 Byte - Used in S3F2, F4, F5, F7, S16F11, 13, 15.
class	MHEAD SECS message block header associated with message block in error - Used in S2F25, F26 This is a one byte binary (Format 10) data structure
class	MID Material ID, 16 Bytes Max.
class	MMODE Matrix mode select, 1 Byte - Used in S7F15.
class	OBJID
class	OBJSPEC OBJSPEC.
class	OBJTOKEN OBJTOKEN.
class	OBJTYPE
class	OFLACK
class	ONLACK
class	OPID Operation ID.
class	PFCD Prefdefined form code, 1 byte - Used in S6F9 This is a one byte binary (Format 10) data structure
class	PODEVENT PODEVENT.
class	PPBODY Process Program Grant (PPBODY) Data Decoder, used in S7F3, S7F6 and S7F36.
class	PPGNT Process Program Grant (PPGNT) Data Decoder, used in S7F2, and S7F30.
class	PPID Process Program ID (PPID) Data Decoder, used in S2F27, most of S7 and S9F13.
class	PRCMDNAME PRCMDNAME.
class	PREVENTID PREVENTID.
class	PRJOBID PRJOBID.
class	PRJOBMILESTONE PRJOBMILESTONE.
class	PRJOBSPACE PRJOBSPACE.
class	PRMTRLORDER PRMTRLORDER.
class	PRPAUSEEVENT PRPAUSEEVENT.
class	PRPROCESSSTART Data value.
class	PRRECIPEMETHOD PRRECIPEMETHOD, indicates the recipe specification type, whether tuning is used and which method is used.
class	PRSTATE PRSTATE.
class	RAC Reset Acknowledge.
class	RCMD Remote command code or string.
class	RCPATTRDATA RCPATTRDATA.
class	RCPATTRID RCPATTRID Data Decoder.
class	RCPBODY Recipe body.
class	RCPCLASS RCPCLASS Recipe class Used in S15F11
class	RCPCMD RCPCMD Indicates an action to be performed on a recipe Used in S15F21, F22
class	RCPDEL RCPDEL - Used in S15F35
class	RCPDESCLTH
class	RCPDESCNM SECS/GEM RCPDESCNM Identifies a type of a recipe: "ASDesc", "BodyDesc", "GenDesc" Used in S15F24
class	RCPDESCTIME RCPDESCTIME The timestamp of a recipe section, in the format "YYYYMMDDhhmmsscc" The name (identifier) of a non-identifier recipe attribute.
class	RCPID RCPID Recipe identifier.
class	RCPNAME RCPNAME Recipe name Used in S15F11
class	RCPNEWID SECS/GEM RCPNEWID The new recipe identifier assigned as the result of a copy or rename operation.
class	RCPOWCODE Indicates whether any pre-existing recipe is to be overwritten (=TRUE) or not (=FALSE) on download Used in S15F27
class	RCPPARNM RCPPARNM The name of a recipe variable parameter setting.
class	RCPPARRULE RCPPARRULE The restrictions applied to a recipe variable parameter setting.
class	RCPPARVAL The initial setting assigned to a recipe valriable parameter.
class	RCPRENAME Indicates whether a recipe is to be renamed (=TRUE) or copied (=FALSE) Used in S15F19
class	RCPSECCODE Indicates the sections of a recipe requested for trasfer or being transferred Used in S15F15, F16, F17
class	RCPSECNM RCPSECNM Recipe section name: "Generic", "Body", or "ASDS" Used in S15F15, F18
class	RCPSPEC Recipe specifier.
class	RCPSTAT RCPSTAT - The status of a managed recipe Used - S15F10
class	RCPUPDT Indicates if an existing recipe is to be updated (=TRUE) or a new recipe is to be created (=FALSE Used in S15F13
class	RCPVERS RCPVERS Recipe version Used in S15F10, F12
class	REPGSZ Total Samples to be made.
class	RESETENA Reset enabled.
class	RESPEC RESPEC Object specifier for the recipe executor Used in S15F29, F33, F35
class	RIC Reset Code.
class	RMACK RMACK - Conveys whether a requested action was successfully completed, dnied, completed with errors, or will be completeed with notification to the requestor.
class	RMCHGSTAT Indicates the change that occurred for an object.
class	RMCHGTYPE
class	RMDATASIZE Indicates the change that occurred for an object.
class	RMGRNT RMGRNT Permission to send, 1 byte.
class	RMNEWNS RMNEWNS New name(identifier) assigned to a recipe namespace.
class	RMNSCMD Action to be performed on a recipe namespace .
class	RMNSSPEC RMNSSPEC The object specifier of a recipe namespace.
class	RMRECSPEC RMRECSPEC The object specifier of a distributed recipe namespace recorder Used in S15F39, F41, F43
class	RMREQUESTOR Set to TRUE if initiator of change request was an attached segment.
class	RMSEGSPEC RMSEGSPEC The object specifier of a distributed recipe namespace segment.
class	RMSPACE
class	RPTID
class	RSDA Request Spool Data Acknoowledge.
class	RSDC Request Spool Data Code - Used in S6F23 The data structure is format 51, that has the following values:
class	RSPACK Reset Spooling Acknoowledge.
class	SARM SARM.
class	SecsDataStructure This is the abstract superclass of all secs data structures (SVID, VID, SV, ect) Each subclass must implement the following to work with the rest of the system...
class	SecsFormat00 This class is a representation of a Format00 or "List".
class	SecsFormat10 This class holds binary data.
class	SecsFormat11 A representation of of the SECS Format11 (Boolean)
class	SecsFormat20
class	SecsFormat22 Unicode Secs Format.
class	SecsFormat30
class	SecsFormat31
class	SecsFormat32
class	SecsFormat34
class	SecsFormat40 This object represents the SECS Format 40 - eight byte floating point.
class	SecsFormat44 This object represents the SECS Format 40 - 4 byte floating point.
class	SecsFormat50 This class represents a 8-byte unsigned integer.
class	SecsFormat51 This class represents a 1-byte unsigned integer.
class	SecsFormat52 This class represents a 2-byte unsigned integer.
class	SecsFormat54 This class represents a 4-byte unsigned integer.
class	SFCD Status form code 1 byte.
class	SHEAD Stored header related to the transaction timer - Used in S9F9 This is a one byte binary (Format 10) data structure
class	SLOTID SLOTID.
class	SMPLN Sample number.
class	SOFTREV This class represents the Secs SOFTREV data structure.
class	SPAACK Equipment Acknowledge Code (SPAACK) Data Decoder, used in S2F4.
class	SPD Service Program Data (SPD) Data Decoder, used in S2F3, F6.
class	SPID Service Program ID (SPID) Data Decoder, used in S2F1, F5, F7, F9, F12 and S9F13.
class	SPR Service Program Results (SPR) Data Decoder, used in S2F10.
class	STIME Sample time.
class	STRACK Spool Stream Acknoowledge.
class	STRID Stream Identification.
class	SV
class	SVID Status Variable ID.
class	SVNAME Status Variable Name.
class	TAGSER SMART-Tag serial number, 4-bytes.
class	TAGSN TAGSN.
class	TARGETSPEC TARGETSPEC Object specifier of target object Used in S14, S15F43
class	TEXT TEXT a single line of characters, Used in S10F1,F3,F5,F9 The format is a 10, 20, 3x or 5x
class	TIAACK Equipment Acknowledge Code.
class	TIACK Time Acknowledge Code.
class	TID Terminal number, 1 byte - Used in S10F1,F3,F5,F7.
class	TIME Time Of Day.
class	TIMEFORMAT TIMEFORMAT: Setting of this ECV controls whether the equipment shall send the the TIME data item in 12-byte or 16-byte format: 0 = 12 byte format(default) 1 = 16 byte format Used in S2F15, S100F15, and S100F132.
class	TIMESTAMP TIMESTAMP A text string indicating the time of an event, which encodes time in the folloing format: YYYYYMMDDhhmmsscc Used in S5F9, F11, F15, S15F41, F44, S16F5, F7
class	TOTSMP Total Samples to be made.
class	TRID Trace request ID.
class	TSIP Transfer status of input port, 1 Byte - Used in S1F10.
class	TSOP Transfer status of output port, 1 Byte - Used in S1F10.
class	UNITS Units Identifier.
class	UPPERDB UPPERDB data decode.
class	V Variable data.
class	VID
class	VLAACK Variable Limit Attribute Acknowledge Code, 1 byte.

Fields in com.ergotech.secs declared as SecsFormat

Modifier and Type	Field and Description
SecsFormat[]	SecsFormat11.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat30.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat31.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat32.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat34.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat40.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat44.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat50.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat51.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat52.dataArray This is the array of data if we receive an array.
SecsFormat[]	SecsFormat54.dataArray This is the array of data if we receive an array.
SecsFormat	SecsDataStructure.theData

Methods in com.ergotech.secs that return SecsFormat

Modifier and Type	Method and Description
SecsFormat	SecsMsg.convertData(SecsFormat temp, java.lang.Object[] struct)
SecsFormat	SecsMsg.convertData(SecsFormat temp, java.lang.Object[] struct, java.util.Vector zeroLength)
SecsFormat	SecsMsg.convertData(SecsFormat secsFormat, java.lang.String className, java.util.Vector zeroLength) Recursively interpret the data structures for messages that have multiple formats embedded within a list (SecsFormat00) object.
SecsFormat	SecsMsg.createSecsFormatObject(int formatCode, int size) Creates a SecsFormat object based on the format code and the size.
static SecsFormat	JSONEncodeDecode.currentValue(GemHostModel.GemValueVariable vidValue) Return a valid SecsFormat representing the value in the provided value object.
static SecsFormat	JSONEncodeDecode.decodeSecsFormat(JSONObject jsonObject)
SecsFormat	SecsFormat00.elementAt(int index) Provides backwards compatibility.
SecsFormat[]	SecsDataStructure.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat00.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat10.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat11.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat20.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat22.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat30.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat31.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat32.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat34.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat40.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat44.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat50.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat51.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat52.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat[]	SecsFormat54.getArray() This allows for arrays of secsformats (not a list of secsformats).
SecsFormat	S0F0.getData() Returns the message as a SecsFormat.
SecsFormat	SecsDataStructure.getData() Return the raw SecsFormat object.
SecsFormat	SecsMsg.getData() This method converts the raw, or unconverted message to SECS data structures.
SecsFormat	SecsMsg.getDataFormats() This method will return the data formats from the SECS Message.
SecsFormat	SecsMsg.getDataFormatsRecursive() Returns a SecsFormat object, representing this message.
SecsFormat	SecsFormat00.set(int index, SecsFormat element) Check for null element

Methods in com.ergotech.secs that return types with arguments of type SecsFormat

Modifier and Type	Method and Description
static java.util.Map<java.lang.String,SecsFormat>	JSONEncodeDecode.decodeMessage(java.lang.String jsonStr) Decode the given string as a JSON Message format, eg.

Methods in com.ergotech.secs with parameters of type SecsFormat

Modifier and Type	Method and Description
void	SecsFormat00.add(int index, SecsFormat element) Check for null element
boolean	SecsFormat00.add(SecsFormat obj) Check for null element
void	SecsFormat00.addElement(SecsFormat obj) Provides backwards compatibility.
SecsFormat	SecsMsg.convertData(SecsFormat temp, java.lang.Object[] struct)
SecsFormat	SecsMsg.convertData(SecsFormat temp, java.lang.Object[] struct, java.util.Vector zeroLength)
SecsFormat	SecsMsg.convertData(SecsFormat secsFormat, java.lang.String className, java.util.Vector zeroLength) Recursively interpret the data structures for messages that have multiple formats embedded within a list (SecsFormat00) object.
boolean	S100F7.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F1.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F10.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F12.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F14.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F15.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F16.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F18.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F20.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F22.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F24.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F26.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F28.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F30.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F32.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F33.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F34.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F35.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F36.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F38.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F4.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F40.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F41.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F42.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F43.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F44.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F47.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F48.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F6.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S15F8.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F10.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F11.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F13.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F14.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F2.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F3.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F4.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F6.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S1F8.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F10.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F12.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F13.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F14.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F18.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F27.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F29.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F33.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F35.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F37.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F41.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F42.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F43.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F44.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F45.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F46.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F47.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F48.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F49.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S2F6.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S5F5.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F1.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F11.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F13.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F16.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F18.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F20.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F22.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F25.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F27.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F30.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S6F8.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S7F6.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	S7F8.convertException(SecsFormat temp) This will check for exceptions in the structure.
boolean	SecsMsg.convertException(SecsFormat temp)
void	SecsFormat00.insertElementAt(SecsFormat obj, int index) Check for null element
void	SecsMsg.replaceDataWith(SecsFormat data) Replaces the outgoing message with the new outgoing message.
static java.lang.String	JSONEncodeDecode.secsFormatToJSON(SecsFormat secsFormat) Encode a SecsFormat to a JSON Object.
static java.lang.String	JSONEncodeDecode.secsFormatType(SecsFormat secsFormat) Return a string representing the type of the SecsFormat.
SecsFormat	SecsFormat00.set(int index, SecsFormat element) Check for null element
void	SecsDataStructure.setArray(SecsFormat[] newValues) This allows for a standard way to set arrays of secsformats.
void	SecsFormat.setArray(SecsFormat[] newValues) This allows for a standard way to set arrays of secsformats.
void	SecsFormat00.setArray(SecsFormat[] newValues) This allows for a standard way to set arrays of secsformats.
void	SecsFormat10.setArray(SecsFormat[] newValues) This allows for a standard way to set arrays of secsformats.
void	SecsFormat11.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat20.setArray(SecsFormat[] newValues) This allows for a standard way to set arrays of secsformats.
void	SecsFormat22.setArray(SecsFormat[] newValues) This allows for a standard way to set arrays of secsformats.
void	SecsFormat30.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat31.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat32.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat34.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat3x.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat40.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat44.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat50.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat51.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat52.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat54.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat5x.setArray(SecsFormat[] array) Set the data array if this is an array.
void	SecsFormat00.setElementAt(SecsFormat obj, int index) Check for null element
boolean	MessageVerifierOneItem.testElement(SecsFormat item)

Constructors in com.ergotech.secs with parameters of type SecsFormat

Constructor and Description
ABS(SecsFormat newData) Create a new message from a SecsFormat data type.
ACKA(SecsFormat newData) Create the object from a SecsFormat data type.
ACKC1(SecsFormat newData)
ACKC10(SecsFormat newData)
ACKC5(SecsFormat newData)
ACKC6(SecsFormat newData)
ACKC7(SecsFormat newData)
AGENT(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ALCD(SecsFormat newData)
ALED(SecsFormat newData)
ALID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ALTX(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
AREYOUTHERE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ATTRDATA(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ATTRID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
CARRIERID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
CEED(SecsFormat newData) Create the object from a SecsFormat data type.
CEID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
CEPACK(SecsFormat newData)
CEPACK(SecsFormat[] newData) Create a new message with LIST (format 00) data.
CEPVAL(SecsFormat newData) Create a new message with and SecsFormat data.
CMDA(SecsFormat newData) Create a new message from a SecsFormat data type.
COMMACK(SecsFormat newData) Create a new message from a SecsFormat data type.
CPACK(SecsFormat newData)
CPNAME(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
CPVAL(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
CSAACK(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
CTLJOBCMD(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
CTLJOBID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
DATAID(SecsFormat newData)
DATALENGTH(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
DRACK(SecsFormat newData) Create a new message from a SecsFormat data type.
DSID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
DSPER(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
DVNAME(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
DVVAL(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
DVVAL(SecsFormat[] newData) Create a new message with LIST (format 00) data.
EAC(SecsFormat newData) Create the object from a SecsFormat data type.
ECDEF(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ECID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ECMAX(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ECMIN(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ECNAME(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
ECV(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
EDID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ERACK(SecsFormat newData) Create a new message from a SecsFormat data type.
ERRCODE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
ERRTEXT(SecsFormat newData) Create a new message from a SecsFormat data type.
FCNID(SecsFormat newData)
GRANT(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
GRANT6(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
HCACK(SecsFormat newData)
HINTEG(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
LENGTH(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
LIMITACK(SecsFormat newData)
LIMITID(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
LIMITMAX(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
LIMITMIN(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
LINKID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
LOC(SecsFormat newData) Create a new message from a SecsFormat data type.
LOWERDB(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
LRACK(SecsFormat newData)
LVACK(SecsFormat newData)
MDLN(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
MEXP(SecsFormat newData) Create a new message from a SecsFormat data type.
MF(SecsFormat newData)
MHEAD(SecsFormat newData) Create a new message from a SecsFormat data type.
MID(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
MMODE(SecsFormat newData)
OBJID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
OBJSPEC(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
OBJTOKEN(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
OBJTYPE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
OFLACK(SecsFormat newData)
ONLACK(SecsFormat newData)
OPID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PFCD(SecsFormat newData) Create a new message from a SecsFormat data type.
PODEVENT(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PPBODY(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
PPGNT(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
PPID(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
PRCMDNAME(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PREVENTID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PRJOBID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PRJOBMILESTONE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PRJOBSPACE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PRMTRLORDER(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PRPAUSEEVENT(SecsFormat newData)
PRPROCESSSTART(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PRRECIPEMETHOD(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
PRSTATE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RAC(SecsFormat newData)
RCMD(SecsFormat newData)
RCPATTRDATA(SecsFormat newData) Create a new message with LIST (format 00) data.
RCPATTRID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPBODY(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPCLASS(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPCMD(SecsFormat newData)
RCPDEL(SecsFormat newData)
RCPDESCLTH(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPDESCNM(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPDESCTIME(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPNAME(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPNEWID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPOWCODE(SecsFormat newData) Create the object from a SecsFormat data type.
RCPPARNM(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPPARRULE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPPARVAL(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPRENAME(SecsFormat newData) Create the object from a SecsFormat data type.
RCPSECCODE(SecsFormat newData)
RCPSECNM(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RCPSPEC(SecsFormat newData) Create a new message from a SecsFormat data type.
RCPSTAT(SecsFormat newData)
RCPUPDT(SecsFormat newData) Create the object from a SecsFormat data type.
RCPVERS(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
REPGSZ(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RESETENA(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RESPEC(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RIC(SecsFormat newData)
RMACK(SecsFormat newData)
RMCHGSTAT(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RMCHGTYPE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RMDATASIZE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RMGRNT(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
RMNEWNS(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RMNSCMD(SecsFormat newData)
RMNSSPEC(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RMRECSPEC(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RMREQUESTOR(SecsFormat newData) Create the object from a SecsFormat data type.
RMSEGSPEC(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RMSPACE(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
RPTID(SecsFormat newData)
RSDA(SecsFormat newData)
RSDC(SecsFormat newData)
RSPACK(SecsFormat newData)
S0F0(int stream, int function, boolean wBit, SecsFormat theData) Create the object with some useful parameters.
S0F0(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F10(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F105(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F11(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F13(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F14(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F15(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F16(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F17(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F18(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F2(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F31(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F32(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F7(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F8(SecsFormat theData) The data is assumed to be correct format and is not checked.
S100F9(SecsFormat theData) The data is assumed to be correct format and is not checked.
S10F0(SecsFormat s1) Dummy SecsFormat constructor.
S10F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S10F2(SecsFormat theData) The data is assumed to be correct format and is not checked.
S10F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S10F4(SecsFormat theData) The data is assumed to be correct format and is not checked.
S10F5(SecsFormat theData) The data is assumed to be correct format and is not checked.
S10F6(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F0(SecsFormat s1) Dummy SecsFormat constructor.
S15F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F10(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F11(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F12(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F13(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F14(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F15(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F16(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F17(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F18(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F19(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F2(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F20(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F21(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F22(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F23(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F24(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F25(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F26(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F27(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F28(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F29(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F30(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F31(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F32(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F33(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F34(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F35(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F36(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F37(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F38(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F39(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F4(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F40(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F41(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F42(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F43(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F44(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F45(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F46(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F47(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F48(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F5(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F6(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F7(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F8(SecsFormat theData) The data is assumed to be correct format and is not checked.
S15F9(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F0(SecsFormat s1) Dummy SecsFormat constructor.
S1F1(SecsFormat s1) Dummy SecsFormat constructor.
S1F10(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F11(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F12(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F13(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F14(byte ack, SecsFormat originalInfo) Creates a new message taking the data from the passed parameters.
S1F14(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F15(SecsFormat s1) Dummy SecsFormat constructor.
S1F16(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F17(SecsFormat s1) Dummy SecsFormat constructor.
S1F18(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F19(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F2(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F20(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F4(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F5(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F6(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F7(SecsFormat theData) The data is assumed to be correct format and is not checked.
S1F8(SecsFormat theData) Creates this message .
S1F9(SecsFormat s1) Dummy SecsFormat constructor.
S2F0(SecsFormat s1) Dummy SecsFormat constructor.
S2F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F10(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F11(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F12(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F13(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F14(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F15(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F16(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F17(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F18(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F19(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F2(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F20(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F21(SecsFormat newMsg) Creates a new S2F21 message taking the data from the passed parameters.
S2F22(SecsFormat newMsg) Creates a new S2F22 message taking the data from the passed parameters.
S2F23(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F24(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F25(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F26(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F27(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F28(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F29(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F30(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F31(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F32(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F33(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F34(SecsFormat value) Creates a new S2F34 message from a SecsFormat
S2F35(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F36(SecsFormat value) Creates a new S2F36 message from a SecsFormat
S2F37(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F38(SecsFormat value) Creates a new S2F38 message from a SecsFormat
S2F39(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F4(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F40(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F41(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F42(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F43(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F44(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F45(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F46(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F47(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F48(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F49(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F5(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F50(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F6(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F7(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F8(SecsFormat theData) The data is assumed to be correct format and is not checked.
S2F9(SecsFormat theData) The data is assumed to be correct format and is not checked.
S5F0(SecsFormat s1) Dummy SecsFormat constructor.
S5F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S5F2(SecsFormat s1) Creates a new S5F2 message taking the data from the passed parameters.
S5F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S5F4(SecsFormat theData) The data is assumed to be correct format and is not checked.
S5F5(SecsFormat theData) The data is assumed to be correct format and is not checked.
S5F6(SecsFormat theData) The data is assumed to be correct format and is not checked.
S5F7(SecsFormat s1) Dummy SecsFormat constructor.
S5F8(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F0(SecsFormat s1) Dummy SecsFormat constructor.
S6F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F10(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F11(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F12(SecsFormat data) create the opbject form a secsofrmat
S6F13(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F14(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F15(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F16(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F17(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F18(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F19(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F2(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F20(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F21(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F22(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F23(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F24(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F25(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F26(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F27(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F28(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F29(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F30(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F4(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F5(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F6(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F7(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F8(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F9(SecsFormat theData) The data is assumed to be correct format and is not checked.
S6F99(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F0(SecsFormat s1) Dummy SecsFormat constructor.
S7F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F10(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F11(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F12(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F13(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F14(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F15(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F16(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F17(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F18(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F19(SecsFormat s1) Dummy SecsFormat constructor.
S7F2(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F20(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F4(SecsFormat newValue) Creates a new S7F4 message taking the data from the passed parameters.
S7F5(SecsFormat newValue) Creates a new S7F5 message taking the data from the passed parameters.
S7F6(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F7(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F8(SecsFormat theData) The data is assumed to be correct format and is not checked.
S7F9(SecsFormat s1) Dummy SecsFormat constructor.
S99F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S9F0(SecsFormat s1) Dummy SecsFormat constructor.
S9F1(SecsFormat theData) The data is assumed to be correct format and is not checked.
S9F11(SecsFormat theData) The data is assumed to be correct format and is not checked.
S9F13(SecsFormat theData) The data is assumed to be correct format and is not checked.
S9F3(SecsFormat theData) The data is assumed to be correct format and is not checked.
S9F5(SecsFormat theData) The data is assumed to be correct format and is not checked.
S9F7(SecsFormat theData) The data is assumed to be correct format and is not checked.
S9F9(SecsFormat theData) The data is assumed to be correct format and is not checked.
SARM(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
SecsFormat00(SecsFormat onlyOne) Creates a list of length one containing only the object provided.
SecsFormat00(SecsFormat[] theData) Create the list from an array of SecsFormat objects.
SFCD(SecsFormat newData) Create the object from a SecsFormat data type.
SHEAD(SecsFormat newData) Create a new message from a SecsFormat data type.
SLOTID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
SMPLN(SecsFormat newData)
SOFTREV(SecsFormat newData) If the newData is a type of SecsFormat20 and the size is exactly six then the value is used directly.
SPAACK(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
SPD(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
SPID(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
SPR(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
STIME(SecsFormat newData) Create the object from a SecsFormat data type.
STRACK(SecsFormat newData)
STRID(SecsFormat newData)
SV(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
SVID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
SVNAME(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TAGSER(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TAGSN(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TARGETSPEC(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TEXT(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TIAACK(SecsFormat newData) Create a new message from a SecsFormat data type.
TIACK(SecsFormat newData) Create a new message from a SecsFormat data type.
TID(SecsFormat newData) Create a new message from a SecsFormat data type.
TIME(SecsFormat newData) Create the object from a SecsFormat data type.
TIMEFORMAT(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TIMESTAMP(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TOTSMP(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TRID(SecsFormat newData) Create a new message with the data contained in a SecsFormat object.
TSIP(SecsFormat newData) Create a new message from a SecsFormat data type.
TSOP(SecsFormat newData) Create a new message from a SecsFormat data type.
UNITS(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
UPPERDB(SecsFormat newData) Create a new message with data contained in a SecsFormat object.
V(SecsFormat newData) Create a new message with SecsFormat data.
VID(SecsFormat newData)
VLAACK(SecsFormat newData)

Uses of SecsFormat in com.ergotech.secs.gem

Methods in com.ergotech.secs.gem that return SecsFormat

Modifier and Type	Method and Description
SecsFormat	GemHostModel.GemValueVariable.getCurrentValue() Return the current value of the variable.
SecsFormat	GemHandler.getData(SecsMsg msg) This will return the data from the message provide.
SecsFormat	GemVID.getDefaultValue() Returns the default value as a SecsFormat.
SecsFormat	GemHandler.getDvname(java.lang.String dvname) Returns an DVNAME (an integer ID) for the name provide or null if the name is not registered.
SecsFormat	GemHandler.getDVNAME(java.lang.String dvname) Returns an ID for any type (not just a DVNAME).
SecsFormat	SendEvent.getExtendedAttribute(java.lang.String attribute) Return the value for an extended attribute or null if the attribute does not exist.
SecsFormat	GemCEID.getLastMessageSent() Returns the last event message that was sent with this CEID.
SecsFormat	GemVID.getLimitAsSF(double limitValue) Returns the upper limit as a SecsFormat.
SecsFormat	GemVID.getLimitMaxAsSF() Returns the upper limit as a SecsFormat.
SecsFormat	GemVID.getLimitMinAsSF() Returns the lower limit as a SecsFormat.
SecsFormat	GemVID.getSecsFormat() Returns the current value of this object as a SecsFormat.
SecsFormat	SecsFormatValueObject.getSecsFormat() This will return the SecsFormat.
static SecsFormat	GemHandler.getSecsFormat(double value, int type) This utility method will find the best container (SecsFormatxx) for a given value.
static SecsFormat	GemHandler.getSecsFormat(java.lang.Object value) This utility method will find the best container (SecsFormatxx) for a given value.
SecsFormat	Monitor.getValue() Returns the condition comparison value.
SecsFormat	GemHandler.getValue(int vid) This allows the equipment to poll the value of any VID.
SecsFormat	GemEquipmentInterface.getValue(SecsFormat vid) This allows the equipment to poll the value of any VID.
SecsFormat	GemHandler.getValue(SecsFormat vid) This allows the equipment to poll the value of any VID.
SecsFormat	GemHandler.getValue(java.lang.String vidName) This allows the equipment to poll the value of any VID.
SecsFormat	SendEvent.setExtendedAttribute(java.lang.String attribute, SecsFormat value) Set an extended attribute and return the existing (may be null).
SecsFormat	GemCEID.setValueObject(ValueObjectInterface newValue, boolean saveData) Received as a result of a value changed.
SecsFormat	GemCEID.setValueObjectSaveData(ValueObjectInterface newValue) Received as a result of a value changed.

Methods in com.ergotech.secs.gem that return types with arguments of type SecsFormat

Modifier and Type	Method and Description
java.util.Map<java.lang.String,SecsFormat>	SendEvent.getAllExtendedAttributes() Return the (mutable) map of extended attributes.
java.util.List<SecsFormat>	GemCEID.getDVIDs() Returns the collection of dvids associated with this CEID.

Methods in com.ergotech.secs.gem with parameters of type SecsFormat

Modifier and Type	Method and Description
GemALID	GemHandler.getAlarm(SecsFormat alid) Returns the alarm server associated with the given alid.
static int	GemHandler.getType(SecsFormat value) This will only work with the standard SecsFormat20, SecsFormat30, ect (the ones in the com.ergotech.secs package).
SecsFormat	GemEquipmentInterface.getValue(SecsFormat vid) This allows the equipment to poll the value of any VID.
SecsFormat	GemHandler.getValue(SecsFormat vid) This allows the equipment to poll the value of any VID.
void	GemHandler.registerAlarm(SecsFormat alid, GemALID theAlarm) Registers an alarm server with the given alid
void	GemEquipmentInterface.registerALID(SecsFormat alid, java.lang.String altx, byte alcd, int setCEID, int clearCEID) Deprecated.
void	GemHandler.registerALID(SecsFormat alid, java.lang.String altx, byte alcd, int setCEID, int clearCEID) Alarm handling.
void	GemEquipmentInterface.registerALID(SecsFormat alid, java.lang.String altx, byte alcd, java.lang.String setCEID, java.lang.String clearCEID) Deprecated.
void	GemHandler.registerALID(SecsFormat alid, java.lang.String altx, byte alcd, java.lang.String setCEID, java.lang.String clearCEID) Deprecated.
void	GemEquipmentInterface.registerECIDValidator(SecsFormat id, ECIDValidationInterface target) This method allows the equipment to validate an ECID before it is changed.
void	GemHandler.registerECIDValidator(SecsFormat id, ECIDValidationInterface target) This method allows the equipment to validate an ECID before it is changed.
void	GemEquipmentInterface.registerForUpdate(SecsFormat id, int type, java.lang.Object target, java.lang.String methodName) this allows the equpiment to watch a vid.
void	GemHandler.registerForUpdate(SecsFormat id, int type, java.lang.Object target, java.lang.String methodName) this allows the equpiment to watch a vid.
GemVID	GemEquipmentInterface.registerVID(SecsFormat3x5x vid, java.lang.String name, int type, java.lang.String units, double limitMax, double limitMin, SecsFormat initialValue, double deadband) VID registration.
GemVID	GemHandler.registerVID(SecsFormat3x5x vid, java.lang.String name, int type, java.lang.String units, double limitMax, double limitMin, SecsFormat initialValue, double deadband) VID registration.
GemVID	GemEquipmentInterface.registerVID(SecsFormat3x5x vid, java.lang.String name, int format, java.lang.String units, SecsFormat initialValue) VID registration.
GemVID	GemHandler.registerVID(SecsFormat3x5x vid, java.lang.String name, int type, java.lang.String units, SecsFormat initialValue) VID registration.
void	GemEquipmentInterface.registerVIDMonitor(int vid, int ceid, java.lang.String condition, SecsFormat value) Register a monitor for a vid.
void	GemHandler.registerVIDMonitor(int vid, int ceid, java.lang.String condition, SecsFormat value) Register a monitor for a vid.
void	GemEquipmentInterface.sendEventReport(SecsFormat ceid) This method will attempt to send an appropriate message for the id.
void	GemHandler.sendEventReport(SecsFormat ceid) This method will attempt to send an appropriate message for the id.
void	GemHandler.sendEventReport(SecsFormat ceid, java.util.Map<SecsFormat3x5x,SecsFormat> dvvals) This method will attempt to send an appropriate message for the id.
void	GemHostModel.GemValueVariable.setCurrentValue(SecsFormat currentValue) Sets the value of this variable.
void	GemControlState.setDefaultValue(SecsFormat newValue) Set the default value.
void	GemECID.setDefaultValue(SecsFormat newValue) Create and add a validator for this element.
void	GemVID.setDefaultValue(SecsFormat newValue) Set the default value.
SecsFormat	SendEvent.setExtendedAttribute(java.lang.String attribute, SecsFormat value) Set an extended attribute and return the existing (may be null).
void	GemCEID.setLastMessageSent(SecsFormat newValue) Sets the last event message that was sent with this CEID.
void	GemID.setProperty(java.lang.String name, SecsFormat value, ValueObjectInterface valueObject) Find the DVNAME of the name and set the name and the value as a property to the provided value object.
void	GemHandler.setValue(int vid, SecsFormat value) This allows the equipment to poll the value of any VID.
void	Monitor.setValue(SecsFormat newValue) Set the "constant" value used as a comparison for the condition.
void	GemEquipmentInterface.setValue(SecsFormat vid, SecsFormat value) This allows the equipment to poll the value of any VID.
void	GemHandler.setValue(SecsFormat vid, SecsFormat value) This allows the equipment to poll the value of any VID.
void	GemHandler.setValue(java.lang.String vidName, SecsFormat value) This allows the equipment to set the value of any VID to the exact SecsFormat value.
void	GemECID.validate(SecsFormat newValue) Validate the potential change.
void	ECIDValidationInterface.validateECIDChange(SecsFormat ecid, SecsFormat from, SecsFormat to) Validate the proposed change of the ECID.

Method parameters in com.ergotech.secs.gem with type arguments of type SecsFormat

Modifier and Type	Method and Description
void	GemHandler.clearAlarm(SecsFormat3x5x alid, java.util.Hashtable<SecsFormat3x5x,SecsFormat> dvvals) Clear Alarm will clear an alarm.
GemCEID	GemEquipmentInterface.registerCEID(SecsFormat3x5x CEID, java.lang.String ceidName, java.util.List<SecsFormat> dvids) CEID registration.
GemCEID	GemHandler.registerCEID(SecsFormat3x5x ceid, java.lang.String name, java.util.List<SecsFormat> dvids) CEID registration.
GemCEID	GemHandler.registerCEIDIfNotExist(SecsFormat3x5x ceid, java.lang.String name, java.util.List<SecsFormat> dvids) CEID registration.
void	GemHandler.sendEventReport(int ceid, java.util.Map<SecsFormat3x5x,SecsFormat> dvvals) This method will attempt to send an appropriate message for the id.
void	GemHandler.sendEventReport(SecsFormat ceid, java.util.Map<SecsFormat3x5x,SecsFormat> dvvals) This method will attempt to send an appropriate message for the id.
void	GemHandler.setAlarm(SecsFormat3x5x alid, java.util.Hashtable<SecsFormat3x5x,SecsFormat> dvvals) Set Alarm will trigger an alarm.
void	GemCEID.setDVIDs(java.util.List<SecsFormat> dvids) Sets the collection of dvids associated with this CEID.

Constructors in com.ergotech.secs.gem with parameters of type SecsFormat

Constructor and Description
SecsFormatValueObject(SecsFormat newValue) Creates a value object with the current value, a null color and QUALITY_GOOD.
SecsFormatValueObject(SecsFormat newValue, int newQuality) Creates a value object with the current SecsFormat value, the color associated with that value (newColor) and QUALITY_GOOD.
SecsFormatValueObject(SecsFormat newValue, int newQuality, java.util.Date timeStamp) Creates a value object with the current SecsFormat value, the color associated with that value (newColor) and QUALITY_GOOD.
SecsFormatValueObject(SecsFormat newValue, int newQuality, java.util.Date timeStamp, java.awt.Color newColor) Creates a value object with the current SecsFormat value, the color associated with that value (newColor) and the quality.

Uses of SecsFormat in com.ergotech.transsecs.secs

Classes in com.ergotech.transsecs.secs that implement SecsFormat

Modifier and Type	Class and Description
class	SecsFormat99 SecsFormat99 is generated by TransSECS to hold the place for an "any" data type in VID lists and other messages.

Methods in com.ergotech.transsecs.secs that return SecsFormat

Modifier and Type	Method and Description
static SecsFormat	SecsFormat99.convertToSecsFormat(ValueObjectInterface value) This will return a SecsFormat for a given ValueObject.
static SecsFormat	TransSecsController.createDataId(int format) Return a unique unsigned data id .
SecsFormat[]	SecsFormat99.getArray()

Methods in com.ergotech.transsecs.secs that return types with arguments of type SecsFormat

Modifier and Type	Method and Description
java.util.List<SecsFormat>	VIBMessageBean.getHostMessageErrorLists()

Methods in com.ergotech.transsecs.secs with parameters of type SecsFormat

Modifier and Type	Method and Description
static ValueObjectInterface	PublishBean.convertSecsFormat(SecsFormat value) This will return a ValueObjectInterface for a SecsFormat...
static int	PublishBean.idTypeFromFormat(SecsFormat secsFormat) Return the type of the ID (30,31,32,34, 50, 51,52,54, etc.
void	PublishBean.publish(java.lang.String tagName, SecsFormat value) Pass through to publish ( tagName, value, true).
void	PublishBean.publish(java.lang.String tagName, SecsFormat value, boolean doPublish) Publish a SecsFormat.
void	VIBInMessageBean.register(java.lang.String dataSourceName, SecsFormat value) Register the data source name.
void	VIBInOutMessageBean.register(java.lang.String dataSourceName, SecsFormat value) Register the data source name.
void	VIBInMessageBean.register(java.lang.String dataSourceName, SecsFormat value, java.lang.String script, java.lang.String deviceName, java.lang.String tagName) Register the data source name.
void	VIBInOutMessageBean.register(java.lang.String dataSourceName, SecsFormat value, java.lang.String script, java.lang.String deviceName, java.lang.String tagName) Register the data source name.
void	SecsFormat99.setArray(SecsFormat[] newValues)

Method parameters in com.ergotech.transsecs.secs with type arguments of type SecsFormat

Modifier and Type	Method and Description
void	TransSecsControllerOPCClient.addALID(int alid, java.lang.String alidName, java.lang.String altx, int alcd, int setCEID, int clearCEID, java.lang.Object source, java.lang.String tagName, java.lang.String script, java.util.List<SecsFormat> dvids) The register method for ALIDs.
void	TransSecsControllerDevicesClient.addALID(int alid, java.lang.String alidName, java.lang.String altx, int alcd, int setCEID, int clearCEID, java.lang.Object source, java.lang.String deviceName, java.lang.String tagName, java.lang.String script, java.util.List<SecsFormat> dvids) The register method for ALIDs.
void	TransSecsController.addALID(long alid, java.lang.String alidName, java.lang.String altx, int alcd, long setCEID, long clearCEID, java.lang.Object source, java.util.List<SecsFormat> dvids) The register method for ALIDs.
void	TransSecsControllerOPCClient.addCEID(int ceid, java.lang.String name, java.lang.Object source, java.lang.String tagName, java.lang.String script, java.util.List<SecsFormat> dvids) The register method for CEIDs.
void	TransSecsControllerDevicesClient.addCEID(int ceid, java.lang.String name, java.lang.Object source, java.lang.String deviceName, java.lang.String tagName, java.lang.String script, java.util.List<SecsFormat> dvids) The register method for CEIDs.
void	TransSecsController.addCEID(long ceid, java.lang.String name, java.lang.Object source, java.util.List<SecsFormat> dvids) The register method for CEIDs.
void	VIBMessageBean.setHostMessageErrorLists(java.util.List<SecsFormat> hostMessageErrorLists)

Uses of SecsFormat in com.ergotech.transsecs.secs.characterization

Methods in com.ergotech.transsecs.secs.characterization that return SecsFormat

Modifier and Type	Method and Description
SecsFormat	EventReportRequest.getCeid()
SecsFormat	CEIDReportsRequest.getCEID()
SecsFormat	ECIDValueRequest.getECID()
SecsFormat	SVIDValueRequest.getSvid()
SecsFormat	ECIDValueResponse.getVidValue()
SecsFormat	SVIDValueResponse.getVidValue()

Methods in com.ergotech.transsecs.secs.characterization with parameters of type SecsFormat

Modifier and Type	Method and Description
static void	Characterize.requestEventReport(TransSecsGEMController transSecsController, SecsFormat ceid) Request the configuration of the ceid provided
void	ALIDListRequest.setALIDType(SecsFormat alidFormat)
void	EnabledAlarmsListRequest.setALIDType(SecsFormat alidFormat)
void	EventReportRequest.setCeid(SecsFormat ceid)
void	CEIDReportsRequest.setCEID(SecsFormat ceid)
void	ECIDValueRequest.setECID(SecsFormat ecid)
void	SVIDValueRequest.setSvid(SecsFormat svid)

Uses of SecsFormat in com.ergotech.transsecs.secs.host

Methods in com.ergotech.transsecs.secs.host that return SecsFormat

Modifier and Type	Method and Description
SecsFormat	DeleteReport.getRptid()

Methods in com.ergotech.transsecs.secs.host with parameters of type SecsFormat

Modifier and Type	Method and Description
void	EventMessageACK.setACKC6Format(SecsFormat ACKC6)
void	TraceDataACK.setACKC6Format(SecsFormat ACKC6)
void	DeleteReport.setRptid(SecsFormat rptid)

Uses of SecsFormat in com.ergotech.vib.manipulators

Methods in com.ergotech.vib.manipulators with parameters of type SecsFormat

Modifier and Type	Method and Description
static int	ReportLabelingManipulator.extractFormatType(SecsFormat obj)