The StartupTrigger script is a TransSECS host-side initialization script, written in JavaScript for the embedded Java/Nashorn engine. It is responsible for:

• Initializing the host-to-tool SECS/GEM connection.
• Configuring the database connection ( if needed)
• Registering a listener for connection status changes.
• Ensuring the tool is in the `ToolStatus` database table (If need as in the example)
• Logging system parameters.
• Preventing redundant setups with flags.

// === Generic Host StartupTrigger ===
 
// Java Imports
var TransSecsController = Java.type("com.ergotech.transsecs.secs.TransSecsController");
var ConnectionStatusListener = Java.type("com.ergotech.transsecs.secs.host.ConnectionStatusListener");
var SimulationManager = Java.type("com.ergotech.util.SimulationManager");
var DataSource = Java.type("com.ergotech.vib.servers.DataSource");
var ValueChangedEvent = Java.type("com.ergotech.vib.valueobjects.ValueChangedEvent");
 
var Thread = Java.type("java.lang.Thread");
var LinkedHashMap = Java.type("java.util.LinkedHashMap");
var System = Java.type("java.lang.System");
 
// Global Config with defaults (properties read from ErgoTechConfiguration.properties)
testingStr = System.getProperty("testing","0");  
testing=parseInt(testingStr,10);
toolID=System.getProperty("toolid","fix_the_toolid");
toolName=System.getProperty("toolname","fix_the_tool_name");
 
lotTable = toolID + "LotHistory";
waferTable = toolID + "WaferHistory";
 
loadPortsStr=System.getProperty("loadports","2"); 
loadPorts = parseInt(loadPortsStr,10);
 
// For Reference (ConnectionStates)
/*
  ENABLE_ALL_EVENTS_FAILED(-80),
  ENABLE_EVENTS_FAILED(-70),
  LINK_REPORTS_FAILED(-60),
  CREATE_REPORTS_FAILED(-50),
  ENABLE_ALARMS_FAILED(-40),
  ONLINE_FAILED(-30),
  COMMUNICATION_FAILED(-20),
  CONNECT_FAILED(-10),
  DISCONNECTED(-1),
  OPERATIONAL(0),  
  CONNECTED(10);  
*/
 
function listenerSetup() {
  simulationManager =  SimulationManager.getSimulationManager();
  simulationState = simulationManager.getCurrentSimulationState();
  DataSource.logMessage("Simulation state is " +simulationState);
 
  onlyOnce= /Devices/UtilityServers_Servers/ConnectionListenerSetup->getIntValue();
 
  if (!simulationState && onlyOnce==0) { 
    try {  
      /Devices/UtilityServers_Servers/ToolId->setStringValue(toolID);
      /Devices/UtilityServers_Servers/ToolName->setStringValue(toolName);
      /Devices/UtilityServers_Servers/ConnectionListenerSetup->setIntValue(rnd);
 
      DataSource.logMessage("StartupTrigger: host initialization started");
      host = TransSecsController.getSingleController();
      count=0;
      while (host == null) { 
        count++;
        Thread.sleep(50);
        host = TransSecsController.getSingleController();
      }
      DataSource.logMessage("Startup Trigger: Host model is ready, rnd="+rnd);
 
      DataSource.logMessage("StartupTrigger: Setting database connection configuration for rnd="+rnd);
      Thread.sleep(200);
      userName=System.getProperty("dbusername","username");
      password=System.getProperty("dbpassword","password");
      ipaddress=System.getProperty("dbAddress","dbaddess");
      dbName=System.getProperty("dbName","dbname");
 
      portStr=System.getProperty("dbPort","1433");
      port=parseInt(portStr, 10);
 
      DBManager="/Devices/DatabaseConnection";
 
      DBManager-->setUrl("jdbc:sqlserver://" + ipaddress + ":"+port+";databaseName="+dbName);
      DBManager-->setUsername(userName);
      DBManager-->setPassword(password);
      DBManager-->setDriverClassName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
 
      DataSource.logMessage("StartupTrigger: DatabaseConnection url is "+ DBManager-->getUrl());
 
      initializedValue=/Devices/UtilityServers_Servers/Initialized->getIntValue();
 
      dbServer = "/Devices/DatabaseConnection";
      count=0;
      while ((dbServer-->isRunning()==false)) {  
        Thread.sleep(500);
        count++;
        if (count % 20 === 0) {
          DataSource.logMessage("TransSECS needs to be toggled to LIVE to continue");
        }	  
      }
      DataSource.logMessage("StartupTrigger: DatabaseConnection is running: "+dbServer-->isRunning());  
      Thread.sleep(100);
 
      DataSource.logMessage("StartupTrigger: Continuing application initialization...");  
      try {
        DataSource.logMessage("StartupTrigger: Checking if tool " + toolName +" exists in ToolStatus database ...");  
        if (!(toolName.contains("fix_the_toolname"))) {  
          existsSQL="SELECT ToolId from FAB_ISS.dbo.ToolStatus WHERE ToolName='"+toolName+"'";
          dbError=1;
          while (dbError==1) {
            Thread.sleep(200);
            try {
              /Devices/DatabaseConnection_Servers/CheckToolStatus->setSQLStatement(existsSQL);		  	
              result=/Devices/DatabaseConnection_Servers/CheckToolStatus->retrieveValueObject();	
              dbError=0;  
            } catch ( e ) {
              DataSource.logMessage("StartupTrigger: error getting result of checking tool in toolstatus table");
              DataSource.logMessage("error "+e);
              DataSource.logMessage("StartupTrigger: waiting another 200 ms for the db connection");
              dbError=1;
            }
          }
          if (result.size()==0) {
            DataSource.logMessage("StartupTrigger: First time INSERT of tool "+toolName);
            insertNewTool(toolID, toolName, lotTable, waferTable, loadPorts);
          }
        } else { 
          DataSource.logMessage("StartupTrigger: Error: toolname parameter is not configured.");
        }
      } catch (e1) {
        DataSource.logMessage("StartupTrigger: Error adding new tool to ToolStatus: " + e);
        DataSource.logMessage(e.printStackTrace());
      }
 
      DataSource.logMessage("StartupTrigger: setting up connection status listener, rnd="+rnd);
      var connectionStatusListener = new ConnectionStatusListener() {	  
        connectionStatusChanged: function(connectionStatus, comment) {
          DataSource.logMessage("ConnectionStatusListener: Connection Status Changed: " + comment + "(" + connectionStatus + ")");
          /Devices/UtilityServers_Servers/CheckDatabaseConnection->setIntValue(connectionStatus);
          dbStatus=/Devices/UtilityServers_Servers/DatabaseOK->getIntValue();
          if (dbStatus!=0) {
            vo = new StringValueObject("StatusUpdate");
            map = new LinkedHashMap();
            map.put("ToolStatusCode", new StringValueObject(connectionStatus));
            map.put("ToolStatus", new StringValueObject(comment));
            vo.setProperty("MAP", map);
            /Devices/UtilityServers_Servers/UpdateToolStatusTable->valueInput(new ValueChangedEvent(this, vo));	  
          }
          if (connectionStatus==10) {
            DataSource.logMessage("ConnectionListener: SECS/GEM connection established to tool.");
          } else if (connectionStatus==0) {
            DataSource.logMessage("ConnectionListener: GEM Host configuration to tool completed.");
          } else if (connectionStatus<0) {
            DataSource.logMessage("ConnectionListener: WARNING: Connection issue detected: "+comment);
          }
        }
      };
 
      if (host != null) {
        onlyOnce = /Devices/UtilityServers_Servers/ConnectionListenerSetup->getValueObject();
        existing = onlyOnce.getProperty("Listener");
        if (existing != null) { 
          try {
            host.removeConnectionStatusListener(existing);
          } catch (err) {
            DataSource.logMessage("StartupTrigger: Exception removing listener" + err);
          }
        }
        onlyOnce.setProperty("Listener", connectionStatusListener);
        /Devices/UtilityServers_Servers/ConnectionListenerSetup->setValueObject(onlyOnce);
        host.addConnectionStatusListener(connectionStatusListener);
        DataSource.logMessage("StartupTrigger: Connection Status Listener registered with host");
      } else {
        DataSource.logMessage("StartupTrigger: host is null, connection status listener not set up");
      }
 
      DataSource.logMessage("StartupTrigger: Updating ToolStatus table for "+toolName);
      vo = new StringValueObject("StatusUpdate");
      map = new LinkedHashMap();
      map.put("ToolStatusCode", 0);
      statusString = "Tool IP Address:\"" + host.getEquipmentHostName() + "\" Port:"+host.getActivePort()+" Device ID:"+host.getDeviceId();
      map.put("ToolStatus", statusString);
      vo.setProperty("MAP", map);
      /Devices/UtilityServers_Servers/UpdateToolStatusTable->valueInput(new ValueChangedEvent(this, vo));	  
    } catch (e) {
      DataSource.logMessage("StartupTrigger Error: Problem in configuration setup");  
      DataSource.logMessage(e.stack);
    }
  }
}
 
// Setup a new tool in the ToolStatus table
function insertNewTool(id, toolName, lotTable, waferTable, ports) {
  DataSource.logMessage("StartupTrigger: Inserting new tool: " + id);
  for (var p = 1; p <= ports; p++) {
    var portToolID = id + "_0" + p;
    var sql = "INSERT INTO FAB_ISS.dbo.ToolStatus (ToolId, ToolName, LotHistoryTable, WaferHistoryTable, Port) " +
              "VALUES ('" + portToolID + "', '" + toolName + "', '" + lotTable + "', '" + waferTable + "', '" + p + "')";
    /Devices/DatabaseConnection_Servers/InsertToolStatus->setSQLStatement(sql);
    try {
      /Devices/DatabaseConnection_Servers/InsertToolStatus->executeStatement();
      DataSource.logMessage("StarupTrigger: Inserted tool: "+toolName+ " and port:"+p +" into ToolStatus table");
    } catch (e) {
      DataSource.logMessage("Startup Trigger: Insert of "+toolName+ " into ToolStatus table failed: " + e);
    }
  }
}
 
///////////////////// MAIN SCRIPT /////////////////
if (incomingValue.getQuality()==0) {
  random = new java.util.Random();
  rnd = random.nextInt(999999);
  print("Startup Trigger MAIN Entry rnd="+rnd);
  toolInitialized = false;
  /Devices/UtilityServers_Servers/Initialized->setIntValue(toolInitialized);
 
  DataSource.logMessage("StartupTrigger: Initializing "+toolName +"("+toolID+") rndID="+rnd);
  /Devices/UtilityServers_Servers/CheckDatabaseConnection->setStringValue("StartupTrigger:Main");
  var r = new java.lang.Runnable() {
    run: function() { listenerSetup(); }
  };
  new Thread(r).start();
  toolInitialized = true;
  /Devices/UtilityServers_Servers/Initialized->setIntValue(toolInitialized);
}
incomingValue;

1. Global Setup Reads config properties (toolID, toolName, loadports) from `ErgoTechConfiguration.properties`.

2. Main Trigger Entry If `incomingValue.getQuality() == 0`:

• Logs startup.
• Generates random `rnd`.
• Clears `Initialized` flag.
• Runs `listenerSetup()` in a separate thread.
• Sets `Initialized` to 1.

3. listenerSetup()

• Checks simulation mode and whether listener already exists.
• Stores ToolId, ToolName, and marks listener setup.
• Waits for Host availability.
• Configures DB connection.
• Ensures tool is in ToolStatus table.
• Sets up and registers a connection listener.
• Updates ToolStatus table with initial status.

4. insertNewTool()

• Inserts a row per load port into ToolStatus.

1. Right-click project name → “Add Devices”. 2. Right-click Devices → “Add UtilityServers”. 3. Right-click UtilityServers → “Add StartupTrigger”. 4. In the Script box, uncheck “set script value to null” and paste this script. 5. Save project, build, and go live.The startupTrigger will be working when the system is startup.