Differences

This shows you the differences between two versions of the page.

--- runtimesetup [2020/05/12 20:42] – wikiadmin
+++ runtimesetup [2026/10/02 21:58] (current) – wikiadmin
@@ Line 1: / Line 1: @@
-**Setting up Runtime Deployments**
+=====Setting Up and Configuring Runtime Deployments=====
-----
+There are a few ways to automatically run your TransSECS deployment or MIX server on your system, depending  on if you are using Windows or Linux (including Raspberry Pi systems).
-**Configuring MIX Installations**
+For TransSECS and MIX on Windows you can add the run.bat to the Windows START menu. You can also set up a service wrapper to start, restart, or stop the application from the Services panel.
-When MIX is running, go to your MIX IP Address (e.g. 192.168.1.xx) and run setup.html, http://192.168.1.xx/setup.html to view the configuration utilities for MIX.
+[[Starting_MIX_TransSECS_Deployments_on_Windows|Windows MIX and Deployment Startup]]
-A configuration page "ErgoTechIOT Management Utilities" will be seen with these links:
+For these applications on Linux you can set up these applications as a service
-Download Logs -- use to get the MIX runtime logs for debugging problems
+[[StartMIXonLinuxAsAService|Start MIX Runtime on Linux as a Service]]
+How to start a runtime (MIX or TransSECS Deployment) on Linux as a Service
-Get Pre-License Key -- use to get the pre-license key for this system
-Update or Install an IOT Runtime License -- use to import an ErgoIOTLicense.lic into the running MIX installation
-Check License Status -- check the MIX Project Deployment License status and the MIX Runtime License status
-**Licensing the Project**
-Projects are are either Trial (if you used a Trial version of MIStudio to build and deploy the project) or Permanent if you used a licensed version (non-trial) of MIStudio to build your project. Trial projects will run only for a limited time, even if the deployment platform (MIX) is licensed.
-**Licensing MIX**
-MIX is the 24/7 deployment platform for MIStudio projects and needs to be licensed for each system it runs on. This license is the MIX Runtime license (ErgoIOTLicense.lic).
-To prepare to license MIX for your runtime platform, use the "Get Pre-License Key" option on the ErgoTechIOT Management Utilities page. You need to have MIX running, even if not licensed to access this configuration utility. When you click on "Get Pre-License Key" a key will be generated which needs to be sent (emailed) to your distributor who will return a license file for this system.
-After you save the key (ErgoIOTLicence_xxxxxxx.lic) file (where xxxxxxx is the pre-license key value), Use "Update or Install an IOT Runtime License" to browse for this key and then then use the Load License button to import this license into MIX. On Windows systems you will need to restart MIX to use this new license.
-**TransSECS Deployments**
-TransSECS will generate self-contained deployment code in your project directory. For each deployment distributed to a runtime system, a TransSECS runtime license must be installed to validate the installation.
-**OPCUA Server Deployments**
-**OPCDA Gateway**
-**Other Deployments**
-**Modbus Slave**
-**//How To//**
-[[Products/HiddenBatchFile|Hidden Batch File Startup]]
-How To start a Windows batch file in hidden mode
-[[Products/WindowsStartup|Start Runtime Automatically]]
-How To start a runtime when Windows starts up