ErgoTechWiki

OPCDA Servers must be run on a Windows System. Use the generated run.bat start the OPCDA server on a Windows 32-bit system.

When you start the OPCDA Server you will see a console log similar to:

Started tool GEMTool on port 5010 device id 1
Loading Library: "ErgoOPC.dll
 Create Server

Build Date:Wed May 23 11:52:47 2012
Creating UnilogServer StartedmanageOPCDAcat
 Register Result 0



        *** TransSECS OPC DLL Build Date: May 23 2012 11:11:13***


Updating server VID.LocalRemoteState
Updating server VID.OnlineOfflineState

To run this OPCDA Server on a 64-bit system you will need to use a 32-bit JRE to run the software. We recommend using Amazon Corretto 8 but any other JDK/JRE version 8 should work.

Download the JRE as a zip that you can unzip in the directory containing your OPCDA Server or in a simple directory on drive C:. You will need to reference this JRE by editing the run.bat file and changing the path used for the JRE. For example, the default path in the run.bat may be:

set path=C:\Users\Public\ErgoTech\TransSECSServers\MIStudioSuite\jre\bin\;%path%

and you will need to change so that you change it to use the 32-bit JRE you are using, such as:

set path=C:\JRE32\bin\;%path%

Amazon Corretto will unzip in a folder jdk1.8.0_{current version} for example, version 302 will be in the folder jdk1.8.0_302 . If you unzipped this in your deployment folder, the folder that has the run.bat file, so that you have one self-contained deployment, you would modify the path line to be:

set path=.\jdk1.8.0_302\bin;%path%

When you start the OPCDA Server on a 64-bit system you will see an error noted about the UnilogServer FAILED. This can be ignored.

Started tool GEMTool on port 5010 device id 1
Loading Library: "ErgoOPC.dll
 Create Server

Build Date:Wed May 23 11:52:47 2012
Creating UnilogServer StartedmanageOPCDAcat
 FAILED
 Register Result 1



        *** TransSECS OPC DLL Build Date: May 23 2012 11:11:13***


Updating server VID.LocalRemoteState
Updating server VID.OnlineOfflineState