Differences

This shows you the differences between two versions of the page.

--- opcuaserversforopcuaclientdevices [2020/05/14 17:43] – created wikiadmin
+++ opcuaserversforopcuaclientdevices [2021/03/21 19:52] (current) – wikiadmin
@@ Line 1: / Line 1: @@
-Using OPCUA Servers for TransSECS Devices as an OPCUA Client
+==== Example Using Kepware V6 OPCUA Server with TransSECS Devices ====
-This example uses the Kepware V6 OPCUA Server
+This example uses the Kepware V6 OPCUA Server to test using OPCUA Client connections from TransSECS.For simplicity we are using NONE/NONE for client connection security and an anonymous login.
-For simplicity we are using no client connection security (NONE) and anonymous logins.
 To make sure the Kepware server will allow this type of connection, use the Kepware Configuration applications, and right click on the Project node, select "Properties..."
-{{:pasted:20200514-164109.png}}
+{{:pasted:20200514-164109.png?400}}
- and select "OPCUA" from the selections on the left side of the panel. Then find the property called "Allow Anonymous Login" under Client Session and change this from No to Yes.
+ and select "OPC UA" from the list on the left side of the panel. Then find the property called "Allow Anonymous Login" under Client Session and change this from No to Yes.
-{{:pasted:20200514-163717.png}}
+{{:pasted:20200514-163717.png?600}}
+Note: If you have problems browsing OPUCA Server tags from TransSECS, make sure the server allows anonymous logins.