Differences

This shows you the differences between two versions of the page.

--- baseraspberrypisetupbookworm [2026/10/27 16:37] – tputman
+++ baseraspberrypisetupbookworm [2026/10/27 16:55] (current) – tputman
@@ Line 11: / Line 11: @@
 For a new installation, use a **Raspberry Pi 4 or Raspberry Pi 5**.
-A TransSECS Devices system can normally run on a 1 GB Pi or better (2 GB or 4 GB, for example). If the Raspberry Pi will also display a MIX or MIStudio user interface in a browser, use **4 GB or more**.
+A TransSECS Devices system can normally run on a 1 GB Pi or better (2 GB or 4 GB, for example). If the Raspberry Pi will also display a MIX user interface in a browser, use **4 GB or more**.
 If your Raspberry Pi came with an OS installed on its microSD Card, you may start with this installation or you may start with a new SD Card and keep this bundled SD Card for reference.
@@ Line 187: / Line 187: @@
 ==== Wired Ethernet ====
-For a TransSECS-only system using wired Ethernet:
+For a system using wired Ethernet:
 <code text>
@@ Line 507: / Line 507: @@
 <code text>
-sudo tar -xzf <Java-25-ARM64-archive>.tar.gz -C /opt/java
+cd /tmp
+wget -O zulu25.tar.gz "https://cdn.azul.com/zulu/bin/zulu25.34.17-ca-fx-jdk25.0.3-linux_aarch64.tar.gz"
+sudo mkdir -p /opt/java
+sudo tar -xzf zulu25.tar.gz -C /opt/java
 ls /opt/java
 </code>
@@ Line 879: / Line 882: @@
 Verify that the time zone is correct and that the system clock is synchronized when a network time source is available.
-If the factory network has no Internet or local time server, the clock may drift. MIX provides another convenient way to set the system time by loading **Get Pre-License Key** on the setup page. In addition, for SECS/GEM tool applications, the host can also set the Pi's clock by sending the standard **S2F31 Date and Time Set Request** message. This updates the system clock in the same way as opening the MIX Get Pre-License Key page updates it from the browser.
 ===== 14. Verify the base setup =====